Monday, February 22, 2021

Why the First Dishwasher Fill Should Use Hot Water

Owning a dishwasher makes post-meal cleanup a much easier process. Clearing dishes, dropping them inside the dishwasher and flipping a switch makes everything sweet and simple. But there is one important step that should not be overlooked.

It is important to always run the hot water in your kitchen sink before running the dishwasher. This will verify that hot water will be used in the wash cycle. Otherwise, the first fill will be full of cold or mildly warm water.

Why is that important?

The hotter the water gets, the more dirt is removed by the dishwashing solution. Dishwashers are designed to heat water to around 140°F. This ensures a thorough wash and removes all residue from dishware. Starting off with hot water helps because that is the pre-rinse stage in which particles of food are removed from dishware.  Also, dishwashers are usually hooked up to a home’s hot water line as the process is predicated on washing with hot water.

Benefits

There are a number of benefits that come with running hot water before starting your dishwasher and they can save you a lot of time, energy and frustration. Here is a closer look at those benefits:

•    No rewashing – Hot water used to spray down dishes before washing will lessen the chances of rewashing. The water temperature says a lot about the thoroughness of the cleaning process. Most people will notice their dishes are much cleaner when starting out with hot water in the fill.

•    Conserving energy – Staring out with hot water will save your system the steps of having to heat the water during the wash process. This may not result in a lot of savings on one occasion, but doing it every day can add up. Dishwashers use energy by heating up water, but the less they have to heat, the less energy is used.

Another important note involves the process of rinsing dishes before putting them into the dishwasher. Many studies and reports have shown this is not necessary as long as there are no heavy food particles or pieces left on the plates. The time you spend rinsing off dishes could be lessened significantly. Just run some hot water and it will be enough to get those particles off your plates.

Following the right protocol will give your dishwasher lots of years of service. However, when something breaks down, contact Plaza Appliance Service for the best dishwasher repair in Charlotte, NC and the surrounding communities.